Page 1 of 1 1
Topic Options
#801942 - 12/13/06 11:08 AM whickh axle to use?
BOOSTEDCIVIC Offline
Jr Member


Registered: 02/05/01
Posts: 678
Loc: new york / virginia
i have a b16a2 in my 1992 hatch which axles will fit?... i have to go get a pair from salvage yard and want to purchase the correct pair..
_________________________
2000 civic hatch
92 swap

Top
Visit Sponsors! Help CSi !
#801943 - 12/13/06 02:05 PM Re: whickh axle to use?
Import Tuner Offline
Gold Member
Post Master Sr


Registered: 03/04/00
Posts: 8185
Loc: Tacoma, Wash..
Right side axle is the same from '90 to '00 B Series cars (Integra, Civic, DelSol)...
The left side however changed in '94 to a female inner joint...

You need to determine which intermediate shaft is currently being used on your engine and choose the years that will fit the shaft...

'90 / '93: Male left inner joint...
'94 / '00: Female left inner joint...
_________________________
Donny
Import Specialty Automotive

Top
#801944 - 12/20/06 08:30 PM Re: whickh axle to use?
giggedy Offline
Newbie


Registered: 12/20/06
Posts: 5
Loc: ON, CA
Assuming you have the appropriate B16A2 hydraulic transmission with the half shaft...you'll need the GSR axles. They come with one male to female axle (driver's side that slides into the half shaft) and one male to male axle (passenger's side going into the transmission).

Check out Street Imports at www.streetimports.com . They have brand new GSR axles for $149.00! And right now, you can get an additional 25% off. Use coupon code DEC25OFF . They even have the half shaft if you need it.
_________________________
I felt guilty once, but she woke up halfway through. Street Imports

Top
#801945 - 12/21/06 02:15 PM Re: whickh axle to use?
Import Tuner Offline
Gold Member
Post Master Sr


Registered: 03/04/00
Posts: 8185
Loc: Tacoma, Wash..
Quote:

Assuming you have the appropriate B16A2 hydraulic transmission with the half shaft...



That's a fairly big assumption, seeing as either the early or late half shaft will bolt up to the motor...
_________________________
Donny
Import Specialty Automotive

Top
#4157699 - 10/13/09 07:59 AM Re: whickh axle to use? [Re: BOOSTEDCIVIC]
BOOSTEDCIVIC Offline
Jr Member


Registered: 02/05/01
Posts: 678
Loc: new york / virginia
I have the axles and half shaft that came with the 99-00 B16A2 motor.....i may not have set them properly and detroyed the bearing in the driver side hub that connects to the half shaft....also the cv joint on the passenger side seems tight when u turn it....did i screw something up on the install or did I use the wrong axles?
_________________________
2000 civic hatch
92 swap

Top
Page 1 of 1 1


Moderator:  Slurp56, The Mad Paki 
Hop to:
Shout Box

CSi Sponsors
Civic Type-R 2-Piece Rotors — $814 Front Pair! Made in England!
View EBC Rotors
ClubSi.com Shirts
StopTech NZ
StopTech New Zealand
StopTech Australia
StopTech Australia
Brake Specials
Contact BuyBrakes
Brake Pad Coupon
Use Code: hondafetish
Advertisement

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads