You are not logged in. [Log In] ClubSi » Forums » General Zone » Si & Type R vs All » So, I'm finally building an engine... *new dyno # 2/7/2014*
Register User       Forum List       Calendar       FAQ      
Page 1 of 9 12345>Last »
Topic Options
#6470140 - 07/20/12 02:04 PM So, I'm finally building an engine... *new dyno # 2/7/2014*
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Put some money down with the local shop that's been working on my car for years. They seem to do a pretty clean job, so I expect the motor to come out great as well. I was originally planning an LS1 swap, but circumstances did not work out, so I'll be doing something else. I'll post more about it, once the parts start to arrive. I'm thinking that realistically the motor should be done and in the car by September.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
Videos
#6470184 - 07/20/12 02:25 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
FCobra94 Offline
Post Master Supreme


Registered: 10/22/01
Posts: 19689
Loc: MD
_________________________
'07 335i

Top
#6470197 - 07/20/12 02:31 PM Re: So, I'm finally building an engine... [Re: FCobra94]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
As someone on Corral said, I have a fully built car around a stock engine. Time to change that.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6470218 - 07/20/12 02:40 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
LowTech302 Offline
Post Master Sr


Registered: 07/11/01
Posts: 9721
Nice its about time. You'll be able to move those pluses in your sig to the right.
Top
#6470346 - 07/20/12 03:33 PM Re: So, I'm finally building an engine... [Re: LowTech302]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
yeah watch out you will want a big windsor soon \:\) you should check out this american iron video of paul brown with a n/a 5.7 ex cup motor.

http://www.youtube.com/watch?v=3Yy8PHXbgMI&feature=related
Top
#6470356 - 07/20/12 03:39 PM Re: So, I'm finally building an engine... [Re: hustler]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
I'll probably be buying my hood from Tiger Racing to keep everything cool. Also have to step up to bigger lines on the oil cooler.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6470444 - 07/20/12 04:18 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
UglyValiant Offline
Post Master Sr


Registered: 10/09/02
Posts: 6364
Loc: Milwaukee, WI
347? 331? 408? 470? C'mon...don't be a bitch and just tease. Put out man! I want details or you're useless to me!
_________________________
1979 Dodge Lil' Red Express Truck
1989 Shelby CSX (#500/500)
The most powerful production minivan money can buy.

Top
#6470461 - 07/20/12 04:22 PM Re: So, I'm finally building an engine... [Re: UglyValiant]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Eagle 331 internally balanced rotating assembly, AFR 185 heads, either Comp or custom cam.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6470592 - 07/20/12 05:21 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
That will be a healthy motor and the 185's are a good match for a naturally aspirated 331. a 205 or a 210 edel vic jr head would have been a good match too, that thing will make power. What intake are you going to use? Don't say stock either \:\) stock intake manifold is a cork. I finally gave in and upgraded to a 96 exploder intake after i grabbed some gt40 heads. For your motor I would look at an Edel Performer RPM 2 intake. That is a great midrange rpm intake and would make the most usable power throughout the powerband on that n/a 331. I had a systemax intake which was similar to the vortech/saleen intake and i just felt like the runners were so big that the velocity suffered with my stock 302 and the e7 heads which were so small. My HP went up by 40+ with the e303 cam but torque dropped considerably and felt like a dud off the line. it definitely ran better with the blower, but the e7 heads and my 19lb injectors with FMU still held me back to 340whp @ 10psi. Not very impressive. would guess you will need 36lb injectors for your new setup. 24lb'ers might just be a tad small.
Top
#6470669 - 07/20/12 06:17 PM Re: So, I'm finally building an engine... [Re: hustler]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
I'm going to reuse my Edelbrock performer that I have installed a while ago. It's been ported to use 75mm throttle body, so should be just fine for this application. I'd like to see 350whp or so, but who knows how much I'll really get.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6470907 - 07/20/12 08:42 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
Impulsive Online nohc
Post Master Supreme


Registered: 11/28/99
Posts: 80834
Loc: Edmonton
Awesome. Glad you're doing it right.
_________________________
2020 Taycan Turbo


Top
#6471581 - 07/21/12 01:25 PM Re: So, I'm finally building an engine... [Re: Impulsive]
ScottStaypuff Offline
Post Master Supreme


Registered: 03/05/00
Posts: 26507
Loc: Ohio
Sounds like a nice combo, this is a car built to turn rather than all out drag racer right?
_________________________

Top
#6471589 - 07/21/12 01:33 PM Re: So, I'm finally building an engine... [Re: ScottStaypuff]
GB Offline
Sharesies!
Post Master Supreme


Registered: 03/22/04
Posts: 37351
Loc: Craigslist
 Originally Posted By: MaverickMan
Sounds like a nice combo, this is a car built to turn rather than all out drag racer right?


This car is pretty much solely built for road courses..
_________________________
Ay yo girl, when you gonna let me tap that?

Top
#6472215 - 07/21/12 11:30 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
UglyValiant Offline
Post Master Sr


Registered: 10/09/02
Posts: 6364
Loc: Milwaukee, WI
 Originally Posted By: ReplicaR
I'd like to see 350whp or so, but who knows how much I'll really get.
Well, the parts are there...it'll depend on the cam you select. For a fuel-injected engine w/ this many cubic inches, I'd look to something in the 228-234 @.050 range (intake side) w/ a 112-114 LSA for a hyd. roller. You'll want to spin this thing to 6500 rpm for those cubes to make the target practice.

If still going to street this car frequently and for fairly common commuting, then 185's are perfect. If heading to the track (either) more so than to the kwik-e-mart, then I'd probably opt for 205's and a cam in the 234-238 range.
_________________________
1979 Dodge Lil' Red Express Truck
1989 Shelby CSX (#500/500)
The most powerful production minivan money can buy.

Top
#6472446 - 07/22/12 09:39 AM Re: So, I'm finally building an engine... [Re: UglyValiant]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
It's still going to be the daily driver for just a little bit longer, not to mention that I'd like to keep the appearance of smog legality with CARB numbers on heads and intake and headers (I'm going with shorty headers. As for the cam, I was thinking of going with Comp Cams XE282HR. I may also go with custom, but that will be decided later.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6474513 - 07/23/12 12:04 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
Would recommend staying with shortys. I had to switch from Kooks to BBK longtubes after I put head studs on the stock block. Getting them in was no fun job because you have to lift the motor up very high. So basically to get the trans out I had to take off the passenger side header by unbolting mounts, raising it, then had to lower it back and bolt the mounts again so i could pull the bellhousing/trans out. Pain in the ass. I don't like unbolting the driveshaft when pulling the trans either so I wiggle it out at an angle making it a little harder before I pull it off the yoke on the ground. Anyway I would steer away from longtubes. Don't think they are worth the hassle unless you are making over 500whp.
Top
#6475527 - 07/23/12 07:50 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
UglyValiant Offline
Post Master Sr


Registered: 10/09/02
Posts: 6364
Loc: Milwaukee, WI
As for the cam, I was thinking of going with Comp Cams XE282HR.[/quote] That cam will make the number...easily. Might be a little wild for the street with those cubes, but will command attention any cruise spot you pull into. NICE.
_________________________
1979 Dodge Lil' Red Express Truck
1989 Shelby CSX (#500/500)
The most powerful production minivan money can buy.

Top
#6503042 - 08/04/12 08:03 PM Re: So, I'm finally building an engine... [Re: UglyValiant]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Well, some of the parts came in already. Here is the lot of parts that came in so far



For bottom end I went with Eagle 331 internally balanced rotating assembly. I really wanted to do an internally balanced engine, so it could be more rev happy. I'm probably not going to rev it too far, since this is a street engine using hydraulic roller cam. Probably going for a 6500 rpm redline. Everything is forged, including the Mahle pistons and H-beam rods.




Top end parts so far are Comp 1.6 roller rockers and hardened pushrods



And since factory engine is a 50oz externally balanced, I can't reuse stock flywheel or balancer. So I ordered one of ACT ProLite flywheel. What's cool about this piece is that most of the material has been removed from outside of the flywheel, in effort to keep the rotating mass down. And it's also one piece, which means that it will be as reliable as stock flywheel.



Other stuff that's not in pictures are just gaskets, and Ford Racing high volume oil pump. Stay tuned for more.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6503435 - 08/05/12 12:54 AM Re: So, I'm finally building an engine... [Re: ReplicaR]
UglyValiant Offline
Post Master Sr


Registered: 10/09/02
Posts: 6364
Loc: Milwaukee, WI
Though you purchased a balanced kit, make sure you go ahead and have it balanced by the machine shop. You'd be surprised how many people buy balanced kits and they turn out not to be terribly balanced. I forget how many grams my "internally balanced" kit was off...but it was very worth my while to pay the extra 175 to get it done and know it was dead nuts on...and now it revs so smoothly...very impressed with the results.
_________________________
1979 Dodge Lil' Red Express Truck
1989 Shelby CSX (#500/500)
The most powerful production minivan money can buy.

Top
#6503513 - 08/05/12 05:02 AM Re: So, I'm finally building an engine... [Re: UglyValiant]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Oh yeah, absolutely. The kit is gonna be balanced. We are still waiting on harmonic balancer to arrive. Once its here, everything is going to machine shop
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6521898 - 08/13/12 01:06 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
Love watching a new build happen \:\) just got back from vacation, so will keep checking your progress.
Top
#6545578 - 08/24/12 01:11 AM Re: So, I'm finally building an engine... [Re: hustler]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Car hit 240k miles today on the way back from work. I gotta say, this is the hardest working engine I've ever seen. Also a bit of an update, rotating assembly went off to get balanced. I've also ordered a solid steering shaft and some new headlights
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6546122 - 08/24/12 10:51 AM Re: So, I'm finally building an engine... [Re: ReplicaR]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
These engines can go a long time when taken care of no doubt about it.
Top
#6546581 - 08/24/12 02:56 PM Re: So, I'm finally building an engine... [Re: hustler]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Ok, so here is the tentative timeline. The motor should be fully assembled by end of second week of September. At that point I will give my car to the shop, and they will begin work on installing the motor, and everything else that's supposed to happen. I should get the car back after a couple of weeks of work, tuning, road testing, and working out all the small kinks.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6547726 - 08/25/12 06:05 AM Re: So, I'm finally building an engine... [Re: ReplicaR]
GB Offline
Sharesies!
Post Master Supreme


Registered: 03/22/04
Posts: 37351
Loc: Craigslist
So, car back to you, finished by second week of october? Ish?
_________________________
Ay yo girl, when you gonna let me tap that?

Top
#6548242 - 08/25/12 04:34 PM Re: So, I'm finally building an engine... [Re: GB]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Yeah, most likely. Maybe sooner. There is another autoX in October, it would be nice to give the car it's first shake down.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6571790 - 09/06/12 09:59 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Few more parts. Say hello to:

Machined block with filed rings



Shorty Headers


In Tank Fuel Pump


Camshaft


Harmonic Balancer


Oil Pan


Roller Lifters (a little blurry)
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6573723 - 09/07/12 06:34 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
ScottStaypuff Offline
Post Master Supreme


Registered: 03/05/00
Posts: 26507
Loc: Ohio
Looking good man. I'm jealous!
_________________________

Top
#6576897 - 09/10/12 01:39 AM Re: So, I'm finally building an engine... [Re: ScottStaypuff]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Another small update. Just put the car on a local scale. With fuel tank being filled to the top the car is 3420 lbs with 57/43 distribution. I'm going to measure it again after the engine work is complete
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6577353 - 09/10/12 11:02 AM Re: So, I'm finally building an engine... [Re: ReplicaR]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
Some nice additions \:\) The Innovators West is a nice piece.
Top
#6577737 - 09/10/12 03:55 PM Re: So, I'm finally building an engine... [Re: hustler]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
I've tried to do best of parts where I could. I understand that ATI is actually the best balancer on the market, however they don't have one for 94-95. They had one in development, but it would not be ready for another couple of months. I went with second best, which is Innovators West.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6577759 - 09/10/12 04:20 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
hustler Offline
Post Master Sr


Registered: 01/09/00
Posts: 6095
Loc: Seattle, WA
An ATI came with the race shortblock I had, very nice unit, I ended up using my motorsport piece since it had more material and figured it would hold up better with the large blower crank pulley after I had it double keyed. It had a removable counterweight as well. Romac's are good as well I'm told. Funny part is i was looking for something cheap to go back on my stock shortblock so I bought an ebay special old stock Lunati unit for around 80 dollars. Seems to be working so far \:\)
Top
#6589802 - 09/16/12 11:36 AM Re: So, I'm finally building an engine... [Re: hustler]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.


Stage 8 bolts for headers.
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
#6589957 - 09/16/12 01:13 PM Re: So, I'm finally building an engine... [Re: ReplicaR]
PsychoEBPSiR Offline
Post Master Sr


Registered: 10/06/00
Posts: 5166
Loc: Vancity,Canada
Awesome man, it ll be like driving a new car . Vids to follow of course
_________________________
2013 mazda 3 skyactiv 6spd /90 240sx coupe sr20det+2871@14psi=315whp/ 09 EVO X w/big tires
PS3 gamertag :AaRonBurgundy Xbox: zEdwardRooney


Top
#6590357 - 09/16/12 05:33 PM Re: So, I'm finally building an engine... [Re: PsychoEBPSiR]
ReplicaR Offline
Post Master Sr


Registered: 05/26/06
Posts: 7097
Loc: E.E.B.
Yeah, actually thinking of asking our digital department at work to do a small clip of the car. I work for a small studio as a sql developer
_________________________
'94 Mustang GT

Acceleration.... \:\( -------+-- \:\)
Handling......... \:\( -------+-- \:\)
Speed............ \:\( ------+--- \:\)

Top
Page 1 of 9 12345>Last »


Moderator:  auxilary, Professor Paki 
Hop to:
Shout Box

CSi Sponsors


ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors
Advertisement
My Cookies · Mark all read Powered by DallasColo (Dallas Colocation services) Contact Us · ClubSi · Top

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads