Page 2 of 2 <12
Topic Options
#7922837 - 10/20/14 06:10 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: loudsubz]
c2k Moderator Offline
Post Master Supreme


Registered: 05/21/00
Posts: 19289
Loc: Wiesloch-Walldorf, Germany
40.52 + free handy.
_________________________
Who cares

Top
#7927086 - 10/23/14 09:13 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: loudsubz]
furball Offline
Post Master Sr


Registered: 09/24/03
Posts: 9483
Loc: Toronto, ON
I just picked up this bitch, a 19mm socket, and a 1/2" torque wrench...

All this 1/4" vs 1/2" vs 3/8" socket size thing is fucking confusing/annoying...


Top
#7927097 - 10/23/14 09:15 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: furball]
Risky Business Offline
Provides a Great Work Environment. he/him
Post Master Supreme


Registered: 05/17/10
Posts: 44789
wtf is confusing about it?

I just used mine last night thinking of this thread...I laughed at all the people doing it by hand I remember those days \:\(

I timed myself with one wheel, at normal speed it took like 8 seconds to remove 5 lugs and wheel from car. If I was rushing I could probably do it under 5 seconds.


Top
#7927129 - 10/23/14 09:25 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
Euphoricuck Offline
Post Master Supreme


Registered: 11/05/03
Posts: 92703
Loc: Canadistan
not all of us can afford fancy tools.
_________________________

Top
#7927130 - 10/23/14 09:26 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: furball]
Euphoricuck Offline
Post Master Supreme


Registered: 11/05/03
Posts: 92703
Loc: Canadistan
 Originally Posted By: furball


All this 1/4" vs 1/2" vs 3/8" socket size thing is fucking confusing/annoying...


... are you for real?
I dont even...
_________________________

Top
#7927132 - 10/23/14 09:27 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Euphoricuck]
LNXGUY Moderator Offline
Post Master Supreme


Registered: 08/06/00
Posts: 106841
Loc: Barrie, Ont,
WHY DOESN'T MY IMPACT GUN COME IN 1/4in?!?!?!??!

_________________________
-Bill
The GN would OWN you, your children and your children's children.
'09 E90 335d

Top
#7927141 - 10/23/14 09:34 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Euphoricuck]
Risky Business Offline
Provides a Great Work Environment. he/him
Post Master Supreme


Registered: 05/17/10
Posts: 44789
 Originally Posted By: Euphoric
I am lazy, prefer to troll internet forums than to install retractable power cord so I don't have to spend 30 mins taking off/putting on 4 wheels by hand, Zimbabwe tech.

Top
#7927145 - 10/23/14 09:35 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
Euphoricuck Offline
Post Master Supreme


Registered: 11/05/03
Posts: 92703
Loc: Canadistan
whats a retractable power cord? Sounds fancy. #lavish
_________________________

Top
#7927149 - 10/23/14 09:36 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Euphoricuck]
Risky Business Offline
Provides a Great Work Environment. he/him
Post Master Supreme


Registered: 05/17/10
Posts: 44789
It's similar to that cord you run from your stove outlet into your garage to weld \:\|
Top
#7927154 - 10/23/14 09:37 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
LNXGUY Moderator Offline
Post Master Supreme


Registered: 08/06/00
Posts: 106841
Loc: Barrie, Ont,
Don't you mean your dryer? Easy way to get 240V in the garage!
_________________________
-Bill
The GN would OWN you, your children and your children's children.
'09 E90 335d

Top
#7927158 - 10/23/14 09:40 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
Euphoricuck Offline
Post Master Supreme


Registered: 11/05/03
Posts: 92703
Loc: Canadistan
 Originally Posted By: Risky Business
It's similar to that cord you run from your stove outlet into your garage to weld \:\|
You mad I have garage access from inside
_________________________

Top
#7927159 - 10/23/14 09:40 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: LNXGUY]
Risky Business Offline
Provides a Great Work Environment. he/him
Post Master Supreme


Registered: 05/17/10
Posts: 44789
He doesn't have a dryer, all about that hang dry life.


Top
#7927162 - 10/23/14 09:40 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Euphoricuck]
Risky Business Offline
Provides a Great Work Environment. he/him
Post Master Supreme


Registered: 05/17/10
Posts: 44789
 Originally Posted By: Euphoric
 Originally Posted By: Risky Business
It's similar to that cord you run from your stove outlet into your garage to weld \:\|
You mad I have garage access from inside





Soon...

Top
#7927164 - 10/23/14 09:41 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: LNXGUY]
Euphoricuck Offline
Post Master Supreme


Registered: 11/05/03
Posts: 92703
Loc: Canadistan
 Originally Posted By: LNXGUY
Don't you mean your dryer?
stove! its closer to the garage. dryer is in the basement.
hes just jelly of my metal fab skillz

_________________________

Top
#7927166 - 10/23/14 09:42 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
Euphoricuck Offline
Post Master Supreme


Registered: 11/05/03
Posts: 92703
Loc: Canadistan
 Originally Posted By: Risky Business




Soon...
*wants to see video of demolition
_________________________

Top
#7927167 - 10/23/14 09:43 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Euphoricuck]
LNXGUY Moderator Offline
Post Master Supreme


Registered: 08/06/00
Posts: 106841
Loc: Barrie, Ont,
That's a sweet welding mask
_________________________
-Bill
The GN would OWN you, your children and your children's children.
'09 E90 335d

Top
#7927185 - 10/23/14 09:53 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
furball Offline
Post Master Sr


Registered: 09/24/03
Posts: 9483
Loc: Toronto, ON
I used to do it. By hand. On the street. With emergency jack, and emergency tools. Did that for like 13 years...

Took about an hour...

 Originally Posted By: Risky Business
I timed myself with one wheel, at normal speed it took like 8 seconds to remove 5 lugs and wheel from car. If I was rushing I could probably do it under 5 seconds.


UPDATE: Just swapped tires. Holy fuck does an impact wrench fucking cut swap times Captain Obvious ... \:o Torque wrench was easy peasy as well.


Edited by furball (10/24/14 06:58 AM)

Top
#7927783 - 10/23/14 01:57 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: Risky Business]
titty sprinkles Offline
Post Master Supreme


Registered: 08/22/05
Posts: 17160
Loc: Toronto,Ontario
 Originally Posted By: Risky Business
He doesn't have a dryer, all about that hang dry life.



That can't be Markham, there's a bylaw for that lol
_________________________
2019 TLX Aspec

Top
#7930380 - 10/24/14 07:46 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: titty sprinkles]
titty sprinkles Offline
Post Master Supreme


Registered: 08/22/05
Posts: 17160
Loc: Toronto,Ontario
fyi crappy tire hose reel on sale for $30.

screw you euphoric


Edited by titty sprinkles (10/24/14 07:55 PM)
_________________________
2019 TLX Aspec

Top
#7932041 - 10/26/14 02:32 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: titty sprinkles]
titty sprinkles Offline
Post Master Supreme


Registered: 08/22/05
Posts: 17160
Loc: Toronto,Ontario
went and bought the hose reel, while I was there I found the paint defender and decided to give it a try. pretty straight forward, mask, wax, spray, let it dry. it sprays on pretty thick, and since it's colder now when you spray it on it looks all orange peel, but when it dries it's nice and clear/flat.

with the wax applied



sprayed, did 4 coats. they say to do 3 but I wanted it extra thick (nohomo) but it didn't run.



and after a couple hours, It was still kinda wet in the middle (that's what she said) and I put a finger print in it, but it should keep off that pitting that you get in winter. today it was nice and clear and flat.



and it doesn't distort the HID cutoff.

_________________________
2019 TLX Aspec

Top
#7932047 - 10/26/14 02:38 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: titty sprinkles]
JEFFOS Offline
Post Master Supreme


Registered: 01/27/00
Posts: 29139
Loc: Toronto
It's a spray? Is it removable? Why not go with a clear vinyl overlay?
_________________________
-Jeff

Top
#7932059 - 10/26/14 02:49 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: JEFFOS]
titty sprinkles Offline
Post Master Supreme


Registered: 08/22/05
Posts: 17160
Loc: Toronto,Ontario
its a spray, and it is removable, just peels off. if this stuff was crap I was going to go with the clear vinyl, but this is a bit easier to apply, I can never get vinyl to lay flat without bubbles.

I just want to pick up a touch up pen and then i'll do the grille, rest of the hood, a pillers and rest of the fenders. then with the oem bra I can say FU to winter.


Edited by titty sprinkles (10/26/14 02:51 PM)
_________________________
2019 TLX Aspec

Top
#7932763 - 10/26/14 10:30 PM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: titty sprinkles]
LNXGUY Moderator Offline
Post Master Supreme


Registered: 08/06/00
Posts: 106841
Loc: Barrie, Ont,
I've found your answer Jay

_________________________
-Bill
The GN would OWN you, your children and your children's children.
'09 E90 335d

Top
#7935004 - 10/28/14 08:49 AM Re: Adapter to make your drill an impact wrench? vCdnTire [Re: titty sprinkles]
Raocorp Offline
Cougar Slayer
Post Master Sr


Registered: 10/10/02
Posts: 7768
Loc: Toronto
 Originally Posted By: titty sprinkles
its a spray, and it is removable, just peels off. if this stuff was crap I was going to go with the clear vinyl, but this is a bit easier to apply, I can never get vinyl to lay flat without bubbles.

I just want to pick up a touch up pen and then i'll do the grille, rest of the hood, a pillers and rest of the fenders. then with the oem bra I can say FU to winter.


the vinyl ones are awesome and are quite easy to apply actually. I did my mazda with only a few tiny bubbles only visible when really up close. it looks great. The mazda headlights are really bad for pitting/fading so I did it pretty much as soon as I got the car. Well after I did the retrofit, which was like a few weeks after I got the car. And I still apply a bit of wax to them before winter too so shit doesnt stick as easily

Top
Page 2 of 2 <12


Moderator:  c2k, LNXGUY, TheRealCSnapper, Professor Paki 
Hop to:
Shout Box

CSi Sponsors

DiGBiC Lighters
DiGBiC Lighters
DallasColo
Dallas Colocation
ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors
Advertisement

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads