#61434 - 07/03/05 04:25 PM
Re: FS: 2003 Civic Si seats. Pic included *DELETED*
|
Vardoulika
Post Master Jr
Registered: 03/29/01
Posts: 1605
Loc: East Valley, AZ
|
B-Series Power Steering Pump: $75
JDM B16A Camshafts Intake & Exhaust: $30
USDM 90-93 Integra Side Moldings(6 piece set): $25
90-93 Integra Intake Resonator: $10
90-93 Integra Front Bumper Cover w/Mesh Grill: $40
(some minor damage on the top of the bumper, 3" x 1.5" hole, fixable)
88-91 Civic STD Intake: $BEST OFFER/TRADE
94-01 Integra A/C Condensor: $BEST OFFER/TRADE
94-01 Integra A/C Reciever-Drier: $BEST OFFER/TRADE
(Comes w/ Reciever and Condensor lines)
1987 Honda Prelude DX: $100
(Blown headgasket, faded paint, jumbled interior, pretty straight body only a couple small dents. PERFECT Project car)
If you are interested in any thing please contact me via one of the following.
EMAIL: vardoulika666@hotmail.com
PHONE: (480) 593-8130
AIM: importegra2
Thanks so much guys,
Jon
Edited by Vardoulika (07/14/05 03:59 AM)
|
Top
|
|
|
|
#61436 - 07/13/05 01:50 PM
Re: FOR SALE/WANTED
|
loose-it
Newbie
Registered: 07/13/05
Posts: 2
Loc: phoenix AZ
|
91 si hatchback... I posted this in the SW post as well. Anyway...I don't have time to fix it. It has either a cracked head or blown gasket. It ran great up until I found this out. It has cold air intake, header, strut braces and lowered about 2 or 3 inches. It is in Mesa. I need to find a running car and need to get rid of this one. I will look at any offer including a trade. call me if you want any more info. 480 313 4233
|
Top
|
|
|
|
#61437 - 07/15/05 01:58 PM
Re: FS: 2003 Civic Si seats. Pic included
|
coupe
Jr Member
Registered: 03/22/02
Posts: 437
Loc: AZ
|
built by me.
ALMOST FORGOT, ICE COLD A/C!
engine: rebuilt jdm h22 over 10k miles ago w/ all new Honda bearings, gaskets etc.
overbore type s pistons, h22a4 rods, removed balance shafts, b&m FPR, 3" intake, stock head.
all machine work done by S&S machine in Mesa, AZ.
trans: code t2t4 from an Accord sir-t w/ 5spd LSD act 6 puck/HD pressure plate. new clutch disk at engine rebuild.
suspension: koni yellow single adjustable struts w/ Ground-Control coilover sleeves w/ custom rates of 300# Front and 350# rear. Rear Suspension Tech. Anti-Sway Bar.
wheels: on the car now are 1996 ITR rims w/ brand new tires.
exterior: s2000 silverstone metallic paint about 3 years ago, 94-95 accord ex front lip, painted skirts/lips, jdm STANLEY headlights, DEPO corners, jdm aftermarket fogs (oem wannabes).
interior: stock, but dirty =)
options, you can choose the set of wheels, either the ITR rims in the pictures or i also have the 17" black volks.
i also have a 2.5" kteller exhaust that was on my car for 2 yrs then i removed to pass emissions and never put back on.
car needs to be TUNED before any racing.
pictures:
and an older one w/ the volks:
motorshot (before headlights):
$6000 OR BEST OFFER
exaccord@cox.net
aim: gen5ex
thanks, have a nice day.
Edited by coupe (07/15/05 02:26 PM)
_________________________
ALTERED4
1992 Honda Civic Lx - daily slow
1991 Honda CRX Si - new project
|
Top
|
|
|
|
#61441 - 07/28/05 02:02 AM
Re: FOR SALE/WANTED
|
superfly_si
Newbie
Registered: 05/25/05
Posts: 15
Loc: ohio
|
i have a set of brand new still in box apexi ws coilovers they were for my 00 si but now i am selling the car, i am try to get 500 for the coil overs u can get ahold of me at pjarrett2004@yahoo.com or pjarr2007@yahoo.com
|
Top
|
|
|
|
#61445 - 09/02/05 11:11 AM
JDM ITR headlight converted DA FS:
|
Vardoulika
Post Master Jr
Registered: 03/29/01
Posts: 1605
Loc: East Valley, AZ
|
Hey guys my old car is up for sale. The guy that got it from me is getting out of the honda game do the teg is being sold. I am just trying to help him out cause I dont want to see it goto some dorkchop. Here is a link to the ad I made for it.
http://www.g2ic.com/forums/showthread.php?t=129542
Thanks guys, Jon
|
Top
|
|
|
|
#61447 - 09/07/05 09:11 AM
Fs: Turboes, Manifolds, & Wastegates
|
EF8_Fan
Poster
Registered: 01/24/03
Posts: 220
Loc: Full Race, AZ
|
Hey Everyone,
A few of my friends and I have a bunch of turbo stuff for sale. If you have any questions at all, please feel free to contact me at anytime. Just to let you all know, everything is OBO, so don’t be shy to make me a reasonable offer.
Here is a link to my vouch page: http://www.honda-tech.com/zerothread?id=941851
Email: henry@full-race.com AIM: Full Race Henry
Rev Hard Turbo Manifold MSRP: $599 Sells For: $325 - 450 SELLING: $275obo
This B Series turbo manifold is a cast design from Rev Hard. The smooth hi-ductile iron guides exhaust gases effortlessly to the turbine giving quick spool-up and reliability. This manifold is AC compatible. T3 Flanged & 35/38mm wastegate port.
Drag Turbo Manifold MSRP: $550 Sells For: $425 SELLING: $275obo
This B Series turbo manifold is a cast design from Drag. This manifold is AC compatible and also includes a life time warranty. T3 Flanged & 35/38mm wastegate port.
Full-Race ProStreet Turbo Manifold MSRP: $1199 Sells For: $1099 SELLING: $949obo
The classic Honda B Series ProStreet turbo manifold is a must for those seeking to extract maximum power from their setup. This item is brand new and ready to go. No waiting for the manifold to get built. It is T3 Flanged & has a 44mm wastegate port.
Turbonetics Deltagate Wastegate MSRP: $250 Sells For: $200 SELLING: $149obo
Designed for durability, with a 1.250" stainless steel valve, nomex/silcone diaphragm and with a unique "stand-off" actuator section, the Deltagate can control boost on engines that develop 300-400HP.
Tial 38mm Wastegate MSRP: $319 Sells For: $239 SELLING: $199obo
TiAL's line up of high performance, race proven Wastegates. TiALs Wastegates are trusted by the biggest names in the racing industry. With so much depending on the performance of the valve, its no mystery team leaders choose to equip their cars with the best.
Turbonetics T3/T04B MSRP: $900 Sells For: $675 SELLING: $449obo
This T3/T4 Hybrid turbochargers consist of a T3 turbine section, (Stage V Trim) and a T4 compressor section (T04B trim). This combination offers the low inertia and fast boost response of the lightweight T3 turbine wheel and the high-airflow characteristics of the T4 compressor family. All T3/T4 Hybrid's are custom matched for specific applications. This particular Hybrid is custom matched for an Acura Integra GSR. This turbo is good up to 500 HP.
Garrett T3/T04E MSRP: $899 Sells For: $619 SELLING: $449obo
This is an excellent turbo with great spool characteristics. MANY people have had tremendous success with it. This turbo consists of a 60 trim T04E compressor wheel with a max flow rate of 53 lb/min, a 0.60 AR T04E compressor housing which is good up to 490 whp. This Turbine is equipped with a 270 degree thrust bearing, a stage 3 turbine wheel, 0.63 turbine housing, and a 4 bolt turbine discharge. Also includes a Full-Race compressor outlet adapter which converts a 2.0” compressor outlet to a 2.5” outlet.
Garrett T3/T67 H.O. MSRP: $1399 Sells For: $995 SELLING: $975obo
The T3/T67 H.O. is the newest addition to the Full-Race turbo family. This is absolutely the biggest most powerful T3/T4 turbo on the market today! The compressor specs consist of T04R 67mm compressor wheel with a max flow rate of 75 lb/min, 0.70AR T04S compressor housing, and is good to 700 whp. The turbine specs consist of a P trim turbine wheel, 0.63 A/R turbine housing and a 4 bolt standard turbine discharge. Also this turbo is equipped with a 360 degree thrust bearing and an Oil cooled & lubricated center section.
|
Top
|
|
|
|
#61448 - 09/07/05 09:29 AM
FS: MSD Ignition Boxes and Coils
|
EF8_Fan
Poster
Registered: 01/24/03
Posts: 220
Loc: Full Race, AZ
|
Hey Everyone,
A few of my friends and I have a bunch of MSD Stuff for sale. If you have any questions at all, please feel free to contact me at anytime. Just to let you all know, everything is OBO, so dont be shy to make me a reasonable offer.
Here is a link to my vouch page: http://www.honda-tech.com/zerothread?id=941851
Email: henry@full-race.com AIM: Full Race Henry
MSD Ignition Box
MSD 6A PN 6200 MSRP: $319.60 Sells For: $179.99 - 215.94 SELLING: $100obo
The 6A is the base model of the capacitive discharge multiple spark 6 Series design. Benefits such as quicker ET's, easier starting, reduced plug fouling, more power and even increased fuel economy can be expected with the 6A's high energy multiple sparks.
MSD 6AL PN 6420 MSRP: $551.80 Sells For: $275.90 - 289.72 SELLING: $150obo
The 6AL delivers everything the 6A does with the addition of a built-in Soft Touch Rev Control. This feature allows you to set an RPM limit to protect the engine from over-rev damage caused by driveline failure or missed shifts. Other MSD RPM Controls can be connected to the 6AL such as a Three Step Module Selector or RPM Activated Switch
MSD Digital-6 Plus PN 6520 MSRP: $762.80 Sells For: $381.40 SELLING: $250obo
The heart of the Digital-6 Plus Ignition is a 15 Megahertz microcontroller, the fastest of all digital ignitions. What this means is the controller analyzes up to 15,000,000 critical instructions per second! This is over three times the speed of comparable ignitions and produces the most accurate trigger signals, timing and rev limits possible. MSD engineers have spent an endless amount of time testing the components of the Digital-6 Plus to ensure the most efficient and reliable operation. The 6 Plus produces more power with less current draw (20% less) by incorporating an IGBT coil driver that can be controlled for improved coil saturation. Also, power MOSFET technology and high frequency magnetic converters require less input current while producing more energy and voltage. Every spark of the Digital-6 Plus ignition is packed with 135 millijoules of spark energy and up to 535 volts. When used with the MSD Blaster HVC Coil, PN 8252, a spark with over 300 milliamps burns across the plug gap for 400 microseconds. Below 3,300 rpm the Digital-6 Plus produces a series of sparks that glows in the cylinder for up to 20° of crankshaft rotation. This incredible heat ensures combustion to produce great power, quick throttle response, smooth idle and quick starts. To prevent any chance of Electro Magnetic Interference (EMI) a filter circuit is made up of state-of-the-art magnetic suppressor components. This, combined with the more than competent microcontroller, checks and rechecks inputs many times to determine “clean” signals before making any compensations. The magnetic input also features a unique microcontrolled feedback circuit for total EMI-free operation.
MSD Digital SCI Plus PN 6350 MSRP: $603.72 Sells For: $371.29 SELLING: $250obo
The Digital SCI+ Ignition Control...delivers the power and accessories that make it ideal for street/strip sport compact cars! High output capacitive discharge sparks at 135mJ and 535 volts ensure complete combustion of the fuel mixture especially at high rpm. The heart of the Digital SCI+ Ignition is a 15 Megahertz microcontroller, the fastest of all digital ignitions. If a dose of nitrous is being injected, there is a retard stage that can be activated automatically to prevent detonation from the increased cylinder pressures. To assist with firm launches, there is also a rev limit that can be activated that will hold the engine at a steady rpm so you can launch at full power! The ignition installs easily to 4, 6 or 8-cylinder engines equipped with a distributor.
MSD Blaster Coils
Blaster 2 PN 8203 MSRP: $93.40 Sells For: $46.70 SELLING: $25obo
The Blaster-2 High Performance Coil is a metal canister, oil filled coil that has specially designed windings to make it perfect for use with the MSD 5, 6, and 7 Series Ignitions or any stock points or electronic ignition. The windings allow you to get the most voltage possible from your ignition. The Blaster-2 uses an alkyd top to prevent arcing between the terminals.
Blaster SS PN 8207 MSRP: $90.80 Sells For: $45.40 SELLING: $30obo
The Blaster SS is an E-core style coil -- A very efficient design in producing high voltage and spark energy. The primary terminals are located at opposite ends of the tall spark tower so there is no chance of arcing.
|
Top
|
|
|
|
#61453 - 09/21/05 11:14 AM
FS: Hybrid B-Series Hydro Tranny and Quaife LSD
|
EF8_Fan
Poster
Registered: 01/24/03
Posts: 220
Loc: Full Race, AZ
|
Hey Everyone,
First off, here is a link to my vouch page: http://www.honda-tech.com/zerothread?id=941851
Contact Info:
Email: henry@full-race.com
AIM: Full Race Henry
I have for sale a Hybrid B-Series Hydro Tranny and Quaife LSD.
The Tranny is out of a 2000 Honda Civic Si. It was completely tore down and rebuilt with new gearing. The gears are as followed:
1st: 3.230 - JDM B18C Spec-R Gearing
2nd: 2.105 - JDM B18C Spec-R Gearing
3rd: 1.360 - JDM B18C SiR-G Gearing
4th: 1.034 - JDM B18C SiR-G Gearing
5th: 0.714 - B18B Gearing
R: 3.00
FD: 4.4
In my opinion, this setup has the optimal gear ratios for a Daily Driven street car. Its great off the line with the short 1st and 2nd gear, it offers great acceleration with the 3rd and 4th gear as its not too short and not too long, and finally my favorite part, the long 5th gear. This 5th gear is from a LS, which is known to have long gears and will save you $$$$ in gas since the prices these days are ridiculous. This transmission includes the standard Reverse and standard 4.4 Final Drive.
SELLING: $999 obo
The Quaife LSD that I have fits 1999-2000 Honda Civic Si, 1990-2001 Civic / Del Sol VTEC DOHC, Integra GS/LS and 1992-1993 Integra GS-R. Comes with a lifetime warranty and has already been assembled with the ring gear and bearings. All it needs is a Speedo Gear which needs to be taken off of your existing diff and then its ready to drop right in. It will drop right into any transmission listed above except for the LS/GS, a different ring gear will be needed, but it can be taken off of your existing diff.
Retails: $995
SELLING: $799 obo
Edited by EF8_Fan (09/21/05 11:19 AM)
|
Top
|
|
|
|
#61454 - 09/26/05 07:09 PM
Re: FOR SALE/WANTED
|
1320DRAG
Newbie
Registered: 01/16/05
Posts: 4
Loc: ARIZONA
|
Selling
24" inch slicks $100.00 obo
92-95 civic full poly- motor mount kit (red) brand new in box from place racing,
B-series * true REV HARD equal lengh, stainless steel manifold brand new in box have receipt
and original box. I bought it for $650.00
*make reasonable offer* not asking for retail, or cost, just reasonable.
I have pictures
Need to get rid of my parts, cant afford to finish my car anymore. Buying a new house, since prices for housing have increased. Before i cant afford one.
Edited by 1320DRAG (09/29/05 04:12 AM)
_________________________
Go fast or go home, no show all go.
|
Top
|
|
|
|
#61458 - 09/29/05 04:09 AM
Re: FOR SALE/WANTED
|
1320DRAG
Newbie
Registered: 01/16/05
Posts: 4
Loc: ARIZONA
|
Thats what sales people do to you, "offered" it was stuck in my head. Sorry, wasn't paying attention.
_________________________
Go fast or go home, no show all go.
|
Top
|
|
|
|
#61459 - 10/03/05 04:35 PM
Re: FOR SALE/WANTED
|
cjb92
Newbie
Registered: 05/28/03
Posts: 66
|
FS: 15in Konig Network in Bronze (volk SE37 ripoffs) 2 brand new tires in 205/50/15 kumho's and 2 falken ziek 205/50/15 that are almost new. Asking for $320 obo... these are 4x100 new price...
Edited by cjb92 (10/26/05 09:05 PM)
|
Top
|
|
|
|
#61466 - 11/05/05 12:44 PM
Re: Kitchen table and 4 chairs
|
coupe
Jr Member
Registered: 03/22/02
Posts: 437
Loc: AZ
|
|
Top
|
|
|
|
Moderator: AZSnake, RR98DX, A_Mantis, Professor Paki
|
|