Putting parts together for my new motor and I am stuck on which valves, stock or 0.5 oversized. My concern is the piston clearance. Heres the specs
ITR Head
B18C block
ITR crank and rods
CTR pistons
S2S2 cams, springs and retainers
My concern is whether the cutouts in the pistons are large enough for the oversized valves. Anyone running this setup already?
_________________________
Vic
86 CRX SI (B16 Powered)
(SM2 Solo2, HPDE-3 NASA & TA-C Time Attack)
13.627 @ 98.36
03 Protege5
07 Harley FXST