Page 10 of 11 « First<7891011>
Topic Options
#21450 - 11/16/05 09:04 AM Re: Greddy turbo owners unite!
SiAdam Moderator Offline
Post Master Supreme


Registered: 07/22/01
Posts: 19264
Loc: West By God Virginia
Quote:

Lol..cool..we'll see..well this is what i got
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8014899564




Good luck.

_________________________
05 Berlina Black S2000 700whp / 500wtq
Built, not bought.

Top
Videos
#21451 - 11/16/05 09:17 AM Re: Greddy turbo owners unite!
LatinEM1 Offline
Newbie


Registered: 11/15/05
Posts: 5
Loc: AZ
Thanks. Any advise? it will be my first boosted car..
Top
#21452 - 11/16/05 09:50 AM Re: Greddy turbo owners unite!
SiAdam Moderator Offline
Post Master Supreme


Registered: 07/22/01
Posts: 19264
Loc: West By God Virginia
Quote:

Thanks. Any advise? it will be my first boosted car..





Do it RIGHT the first time.

You can be smart & thrifty, but not CHEAP.

_________________________
05 Berlina Black S2000 700whp / 500wtq
Built, not bought.

Top
#21453 - 11/16/05 11:11 AM Re: Greddy turbo owners unite!
baellofaboy Offline
Jr Member


Registered: 08/19/05
Posts: 440
Loc: Michigan
Looks like a 1700 dollar investment to me, i'd piece together my own kit...
_________________________
Bannable Content: "Whatever guys, when i was stock i was low 15's, i smoke slap shifts rsx."

Top
#21454 - 11/18/05 07:03 PM Re: Greddy turbo owners unite!
Tetronious Offline
Jr Poster


Registered: 09/18/02
Posts: 115
Loc: Virginia
Think I'll add myself to the list. Had my greddy kit for about 2-1/2 years. Been on blue box this whole time until recently. Car has been set at stock boost the whole time until now.

Setup:

Stock B16
Greddy 18G
Full 2.5" Exhaust
TurboXS MBC @9psi
Hondata s200

p.s. sorry for bad pic.

Tuned at 9psi
224.36whp
172.65ft/lb tq

Top
#21455 - 11/25/05 06:08 PM 18G Downpipe
vspecsir Offline
Poster


Registered: 03/25/03
Posts: 266
Loc: 808 State
I've been searching for a downpipe upgrade for the 18G for quite sometime now. And it has been drawn to my attention that there is no way to upgrade from the 2" Greddy elbow and retain A/C. I needed to retain my AC so in the end, this was my only choise. 2.5" Flared to 3" Stainless downpipe with flex, I had this made with an extra o2 bung for a wideband o2 sensor. I will post pics again after I get my Kteller 3" exhaust. Oh yea, custom made @ spoolin performance





Edited by vspecsir (11/25/05 06:13 PM)

Top
#21456 - 11/25/05 07:06 PM Re: 18G Downpipe
Tetronious Offline
Jr Poster


Registered: 09/18/02
Posts: 115
Loc: Virginia
Nice dp. Spoolin made mine too
Top
#21457 - 11/26/05 08:00 PM Re: 18G Downpipe
vspecsir Offline
Poster


Registered: 03/25/03
Posts: 266
Loc: 808 State
Quote:

Nice dp. Spoolin made mine too




what size is your pipe? did you have fitment issues bolting up to the elbow. Spoolin already told me that it will bolt up, I'm just curious as to wether or not it really will.
_________________________
00' Civic Si L'dat

Top
#21458 - 11/27/05 11:58 AM Re: 18G Downpipe
Tetronious Offline
Jr Poster


Registered: 09/18/02
Posts: 115
Loc: Virginia
Quote:

Quote:

Nice dp. Spoolin made mine too




what size is your pipe? did you have fitment issues bolting up to the elbow. Spoolin already told me that it will bolt up, I'm just curious as to wether or not it really will.




Mines a 2.5". No issues bolting up to dp at all, however; I did take it to a shop to get it put on, because they had to weld my flange on the end for my cat to bolt up to. The only thing they had a issue was having to extend the wire for the o2 sensor to reach so it could plug into. I think the way it was made it had a slight angle on it so the wires needed to be longer.
So, other than that the no fitment issues at all fitting right up to the elbow bolt pattern. If yours is 3" it might be different. I do know its a tight fit between mine and my oil return line.

Top
#21459 - 12/13/05 12:54 PM Re: Greddy turbo owners unite!
j.r.ortiz Offline
Newbie


Registered: 07/01/05
Posts: 8
Loc: cedar park, tx
I'm running 8psi (with manual boost controller), type 24 intercooler, apexi bov, civic type r intake cam (I already had in the motor before the turbo), 310 injectors, 11lbs flywheel, exedy stage 1 clutch, greddy evo 2 cat back exhaust (stock cat still in place), and tuned in using e-manage. Results = 218 hp with 179 tq.

Edited by j.r.ortiz (12/16/05 09:04 PM)

Top
#21460 - 12/28/05 08:53 PM Re: Greddy turbo owners unite!
vspecsir Offline
Poster


Registered: 03/25/03
Posts: 266
Loc: 808 State
how does that exedy clutch work out for you? no problems holding power with the stage 1?
_________________________
00' Civic Si L'dat

Top
#21461 - 12/30/05 08:54 AM Re: Greddy turbo owners unite!
j.r.ortiz Offline
Newbie


Registered: 07/01/05
Posts: 8
Loc: cedar park, tx
So far the exedy stage 1 clutch is holding up. Driving it around is no problem. And if I floor it while in 1st gear (even when on a roll), and between 6800-7000rpm on 2nd gear, it will spin the tires off the ground. But sometimes when I floor it while in 1st gear, I have felt the clutch start to slip after vtec kicks in. So I try to resist the temptation of doing this.
Top
#21462 - 12/31/05 01:17 AM Re: Greddy turbo owners unite!
RyCeRoCkEtZ Offline
Post Master Sr


Registered: 10/26/03
Posts: 5553
Loc: NorCal, FrisCo, Bay Area!
For those who are in CA and have this kit, any problems passing sniffer and visual? This is probably the only thing preventing me from going boost.
_________________________
'00 EBP EM1 Si (K inspired) - Present, soon to be gone...
'05 TYB YZF R6 - sold 09-19-2007, you will be missed..
'08 TYB YZF R6 - 02-12-08
fAsT cAr aRe fOr dRaG rAcInG
fAsT dRiVeR aRe foR aUtOcRoSs

Top
#21463 - 12/31/05 07:14 AM Re: Greddy turbo owners unite!
RyCeRoCkEtZ Offline
Post Master Sr


Registered: 10/26/03
Posts: 5553
Loc: NorCal, FrisCo, Bay Area!
Went on Ebay and came across this greddy turbo kit. I find it sort of hard to believe being this cheap and comes with everything Greddy Turbo Kit
_________________________
'00 EBP EM1 Si (K inspired) - Present, soon to be gone...
'05 TYB YZF R6 - sold 09-19-2007, you will be missed..
'08 TYB YZF R6 - 02-12-08
fAsT cAr aRe fOr dRaG rAcInG
fAsT dRiVeR aRe foR aUtOcRoSs

Top
#21464 - 12/31/05 01:16 PM Re: Greddy turbo owners unite!
vspecsir Offline
Poster


Registered: 03/25/03
Posts: 266
Loc: 808 State
i sure hope you dont plan on bidding on that.
_________________________
00' Civic Si L'dat

Top
#21465 - 12/31/05 03:06 PM Re: Greddy turbo owners unite!
RyCeRoCkEtZ Offline
Post Master Sr


Registered: 10/26/03
Posts: 5553
Loc: NorCal, FrisCo, Bay Area!
nope
_________________________
'00 EBP EM1 Si (K inspired) - Present, soon to be gone...
'05 TYB YZF R6 - sold 09-19-2007, you will be missed..
'08 TYB YZF R6 - 02-12-08
fAsT cAr aRe fOr dRaG rAcInG
fAsT dRiVeR aRe foR aUtOcRoSs

Top
#21466 - 01/01/06 07:12 PM Re: Greddy turbo owners unite!
J-Tuned Moto Offline
Newbie


Registered: 01/01/06
Posts: 54
Loc: Philly
Who is making the most hp on the greddy kit that is on this forum, i mean either 1.6 or stroked b16??

Edited by J-Tuned Moto (01/01/06 07:13 PM)
_________________________
James

Top
#21467 - 01/09/06 07:02 AM Re: Greddy turbo owners unite!
Buzzbomb Offline
Sr Member


Registered: 11/02/01
Posts: 1197
Loc: Bryan, Ohio, USA
The kit new come with 2 replacement manifold bolts that clear the hump of the 2 center manifold runners. I bought a used kit that didn't come with them. I went to the hardware store and found a flanged head M8x1.25 bolt and purchased a 20mm one. The stock bolt is 24mm. That didn't fit so I purchased a 16mm. That fit in, but wasn't long enough to engage the threads in the head. So now what? What have other people done? I have an email in to Greddy but I'm not expecting much help from them.
Thanks for any help.
_________________________
Authorized AMSOIL Dealer

00' Si Turbo
02' WRX Wagon XPT Stage2
13' Tribeca 3.6R Limited

Top
#21468 - 01/09/06 09:51 AM Re: Greddy turbo owners unite!
AMS Offline
Jr Member


Registered: 11/27/04
Posts: 507
Loc: MA
Quote:

The kit new come with 2 replacement manifold bolts that clear the hump of the 2 center manifold runners. I bought a used kit that didn't come with them. I went to the hardware store and found a flanged head M8x1.25 bolt and purchased a 20mm one. The stock bolt is 24mm. That didn't fit so I purchased a 16mm. That fit in, but wasn't long enough to engage the threads in the head. So now what? What have other people done? I have an email in to Greddy but I'm not expecting much help from them.
Thanks for any help.




Use studs and nuts.

Top
#21469 - 01/11/06 09:51 AM Re: Greddy turbo owners unite!
Buzzbomb Offline
Sr Member


Registered: 11/02/01
Posts: 1197
Loc: Bryan, Ohio, USA
Thanks, after posting and stepping back and thinking about it more, I figured this is what I was going to have to do. It's good to have a confirmation tho.
_________________________
Authorized AMSOIL Dealer

00' Si Turbo
02' WRX Wagon XPT Stage2
13' Tribeca 3.6R Limited

Top
#21470 - 04/19/06 03:41 PM Re: Greddy turbo owners unite!
azn0ne Offline
Newbie


Registered: 04/15/06
Posts: 3
Loc: Dallas, TX
99 Si with Greddy 18G turbo kit and type 31 fmic in a built B16A...factory preset boost...
Sorry, no numbers yet cuz she hasn't been tuned for the lower compression forged pistons and head work...damned proprietary Emanage crap!! Getting an AEM EMS soon so hopefully I'll be able to work out all the bugs...

Top
#21471 - 04/20/06 05:25 PM Re: Greddy turbo owners unite!
azn0ne Offline
Newbie


Registered: 04/15/06
Posts: 3
Loc: Dallas, TX
anyone out there using the 18g kit for the 99si running the emanage that came with the kit? i'm curious what the jumper settings are from the factory.
Top
#21472 - 05/08/06 09:51 AM Re: Greddy turbo owners unite!
TwistedSi Offline
Jr Poster


Registered: 08/03/05
Posts: 116
YAY!! I will be joining this thread this weekend.. I ordered a Greddy kit with type 24 and upgraded to some 450cc injectors.. Now just gotta save up for the Hondata and ditch the blue box junk.. What is the safest amount of boost to run on stock internals with this kit? I had a Drag kit on prior to this and blew my motor at 10 psi.. Was hoping to run at least 9 psi with this since it is a smaller turbo with not as much power.. This time I got a good tuner also ..
_________________________
www.twisted-addiction.com

Top
#21473 - 05/08/06 02:49 PM Re: Greddy turbo owners unite!
jdmslave Offline
Poster


Registered: 01/20/06
Posts: 207
Loc: stl,MO
you guys running the greddy kit without the intercooler,how long can u drive the car for before its starts running hot?
Top
#21474 - 05/08/06 05:02 PM Re: Greddy turbo owners unite!
caRRRR Offline
Post Master Jr


Registered: 02/21/06
Posts: 1762
Loc: P.C. > U
Quote:

you guys running the greddy kit without the intercooler,how long can u drive the car for before its starts running hot?




are you asking about air temp or water temp?
_________________________
00 FBP Si ~~ GT3582RLE 56/84

Top
#21475 - 05/10/06 01:28 AM Re: Greddy turbo owners unite!
vspecsir Offline
Poster


Registered: 03/25/03
Posts: 266
Loc: 808 State
Quote:

you guys running the greddy kit without the intercooler,how long can u drive the car for before its starts running hot?





lol, what do you mean running hot
_________________________
00' Civic Si L'dat

Top
#21476 - 05/11/06 09:11 AM Re: Greddy turbo owners unite!
TwistedSi Offline
Jr Poster


Registered: 08/03/05
Posts: 116
I think he means your temp sensor in the car rising..hahaha
_________________________
www.twisted-addiction.com

Top
#21477 - 05/11/06 09:48 AM Re: Greddy turbo owners unite!
Buzzbomb Offline
Sr Member


Registered: 11/02/01
Posts: 1197
Loc: Bryan, Ohio, USA
I can now offically add myself to this thread!

2000 Si
Stock B16A2
GReddy 18G kit @ 5.5psi
Treadstone bar & plate intercooler
RC 440's
Chipped P06 converted to P28
Uberdata
PLX M-300 wideband
Resonator test pipe
Apexi WS exhaust

Having a blast!
_________________________
Authorized AMSOIL Dealer

00' Si Turbo
02' WRX Wagon XPT Stage2
13' Tribeca 3.6R Limited

Top
#21478 - 05/11/06 10:34 AM Re: Greddy turbo owners unite!
TwistedSi Offline
Jr Poster


Registered: 08/03/05
Posts: 116
Quote:

I can now offically add myself to this thread!

2000 Si
Stock B16A2
GReddy 18G kit @ 5.5psi
Treadstone bar & plate intercooler
RC 440's
Chipped P06 converted to P28
Uberdata
PLX M-300 wideband
Resonator test pipe
Apexi WS exhaust

Having a blast!




Any HP numbers yet??
_________________________
www.twisted-addiction.com

Top
#21479 - 05/11/06 10:47 AM Re: Greddy turbo owners unite!
Buzzbomb Offline
Sr Member


Registered: 11/02/01
Posts: 1197
Loc: Bryan, Ohio, USA
No, just street tuned for now. I want to get to a dyno sometime this summer. Will probably do this after I buy a boost controller.
_________________________
Authorized AMSOIL Dealer

00' Si Turbo
02' WRX Wagon XPT Stage2
13' Tribeca 3.6R Limited

Top
#21480 - 05/19/06 11:46 AM Re: Greddy turbo owners unite!
dogg2k78 Offline
Jr Poster


Registered: 08/25/04
Posts: 185
Anyone have any problems with the install. My tranny almost hits the turbine and I can't get the filter on and I have to also buy a slim fan for the AC. Running into several problems.
Top
#21481 - 05/19/06 06:36 PM Re: Greddy turbo owners unite!
caRRRR Offline
Post Master Jr


Registered: 02/21/06
Posts: 1762
Loc: P.C. > U
Quote:

Anyone have any problems with the install. My tranny almost hits the turbine and I can't get the filter on and I have to also buy a slim fan for the AC. Running into several problems.




the COMPRESSOR is pretty close to the block. you were supposed to use the little intake pipe to hook up to the inlet with the coupler that is supplied with the kit. shouldn't be a problem at all. thinner fan is an option but you can do it without it.
_________________________
00 FBP Si ~~ GT3582RLE 56/84

Top
#21482 - 05/19/06 08:53 PM Re: Greddy turbo owners unite!
baellremoteuse Offline
Member


Registered: 10/07/05
Posts: 840
Loc: Michigan :)
Greddy instructions ask for you to cut up the radiator fan shroud.
_________________________
Be lamps unto yourselves. If you can not read do not post. Lead by example *67, not with threats.

Top
#21483 - 05/20/06 12:07 AM Re: Greddy turbo owners unite!
SiAdam Moderator Offline
Post Master Supreme


Registered: 07/22/01
Posts: 19264
Loc: West By God Virginia
Quote:

Greddy instructions ask for you to cut up the radiator fan shroud.








Go to Autozone/Napa/Advanced and get a slim fan. Flows better and looks alot cleaner while giving you plenty of extra room.

_________________________
05 Berlina Black S2000 700whp / 500wtq
Built, not bought.

Top
#21484 - 05/20/06 06:30 AM Re: Greddy turbo owners unite!
dogg2k78 Offline
Jr Poster


Registered: 08/25/04
Posts: 185
I think I'm going to just buy a slim fan at Auto Zone or something.

But in regards to the compressori can't even get the coupler in there but we are going to try again today. I'm goin to take some pics and show you guys.

Do you guy have any pics of your turbo setups

Top
Page 10 of 11 « First<7891011>


Moderator:  M3Pilot or M3Driver, SiAdam, Professor Paki 
Hop to:
Shout Box

CSi Sponsors


ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors
Advertisement

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads