you guys better not be using chamois anymore....and if you still are i'll be doing a order from e-shine soon so I can grab some more waffle weave towels if anyone wants/needs one.

wow YOU are the man!
That is cray cray. how long did it take???

sorry what?

what's wrong w/ chamois?

btw nice work

wash once a year

is this what you use?

http://www.eshine.ca/cobra_the_guzzler_waffle_weave_16x_24-3046.php

?

You are going to see those rust spots every spring no matter what if you own a white car.

Use Iron-X to remove.

Is it rust? I've been told it's tree sap, rail dust, road tar, whatever. My sister in law has it all over her white crv so I'll have to polish that out too.....shit.

ricardo clay
/end thread

Anyone use a foam gun/cannon? There are two types, one for pressure washers and one for reg hoses.

Are these worth it? Do they help or is it just a novelty item?

Be careful with M105. Although it does make very quick work of removing scratches, on most paints it is removing way more clear coat than you need to be. Its basically liquid sandpaper and I see it being used way too much.

+1 have a couple of bars.

I would need a full day to do mine from top to bottom.
- wash
- iron x
- wash
- clay
- wash
- remove swirls
- wipe down w/eraser
- stage 1 polish
- stage 2 polish
- repeat stage 2 x2 or 3
- finally LSP


Got this one and it's worth it for those quick washes where you don't need to drag out buckets

poor environment...so much water waste

Be careful with M105. Although it does make very quick work of removing scratches, on most paints it is removing way more clear coat than you need to be. Its basically liquid sandpaper and I see it being used way too much.

Ylu should leave the tape on. Hawt new tron look

No idea how the hell you did a detail in 6 hours.

I spent 6 hours today just removing swirl marks...had to go through two orange pads, basically two phases of the same shit 3-4 minutes for every 2'x2'. Fuck i hate detailing cars, I might be over doing it compared to most but I don't want to do it for a few years.

Some pics from today,









one pass on the rear 1/4 with pc7424, door wasn't done yet.

nice results but how did you burn through 2 pads? I burned through a pad the first time using my PC. I emailed them and they said the main reason is too much pressure applied. The pads should last a long time.

Yep I've used my lake country orange pad at least 6x time.

you just have to take care of them, I've never replaced pads. just have to wash them out with a bit of dish soap and let them air dry. instead of putting more pressure I would turn up speed and use 1/2 of the pressure, or a more aggressive pad. what color pad were you using risky? even still new pads are always nice. or actually, are you using the little ones?

anyways, part two today. de-badged, polished the muffler tips, high heat painted the muffler cans as they were flaking and looked ugly, and just re-dressed the interior. oh and tossed in those baller bright white plate bulbs.

before:



after:





and I was going to put on the DC5R wheels but decided against it, I don't have the TPMS sensors so i'll have to dismount, install and re-mount the tires with them in it. do they make cheaper aftermarket sensors?

How do you guys clean/condition your leather seats?

Thinking about getting the swissvax kit.

Those rims are hot fiya!

But does it still have the VTEC light?

What you would have said in 2001, mr white rims with polished lip.

Bill how about not this weekend but the following weekend pending weather?

-Put in Philips Ultinon bulbs in headlights

What operates the brakes when you don't have real calipers?

^ that's pretty rad.

you think that stuff would be good to keep headlights from yellowing?

^ pretty cool

Washed it for the first time on the weekend but I'll need to wax it soon.

-Painted the calipers silver
-Put on the red vinyl to get rid of the ugly yellow signals today (looks way better)
-Light smoke vinyl on the lower reflectors to better blend in with taillights
-Put in Philips Ultinon bulbs in headlights
-Wheel spacers on the way
-Pick up Tanabe springs Saturday
-Rear ghetto tint comes off and new 50% tint comes on Wednesday

I gotta get on cleaning the new ride. I will just clay and wax. Not pro enough to take off the swirls.

Since you are down the street from me feel free to borrow my pc7424, buy your own pads and go to town removing the swirls

The chrome around the windows helps a sedan have a coupe look on higher end cars. I thought about vinyl for it but I think it will look worse.

Avant garde m580 wheels

Chrome sucks on cars, but that's just me lol

These wheels go to the new owner in a few weeks and my new ones come in next week most likely.

The chrome around the windows helps a sedan have a coupe look on higher end cars. I thought about vinyl for it but I think it will look worse.

Avant garde m580 wheels

Wheels to new wheel owner

Gross. Thx for posting more chrome nastiness 4age. I completely disagree how any chrome looks good on anything that is suppose to be sporty looking.

Jaguar, Maserati, Aston Martin, Rolls etc all use it in their designs. I agree it looks out of place on some cars but it is a standard auto design characteristic

Did you dark out the chrome in the front of your car? What did you use?

I agree. It is on a luxo box, as I said chrome has no business being on any car that is suppose to be sporty.

Just the grille surround. I used plastidip - if done right looks decent and is amazingly durable to be on a front end that gets hit with rocks, sand and bad weather.

Just the grille surround. I used plastidip - if done right looks decent and is amazingly durable to be on a front end that gets hit with rocks, sand and bad weather.

New rims on (and look at that sweet sweet chrome window trim )

Nice. 2 things though. The chrome lol and now you need a bbk!!!

I think a bbk would make it more boy racer ish, I love it the way it is now. Chrome included.

So you're saying a M5, E63, RS7 are boy racers?

Thanks - not really many pics - I just took a couple of phone pics as I parked. I park on the road there to check my ride height after I adjust coilovers.

I really like the lip on it.

dude very nice. too bad the rear doesn't have a bit more lower offset doe...but otherwise, tight.

Lip on the bumper you tool!

Lip on the bumper you tool!

Thanks - not really many pics - I just took a couple of phone pics as I parked. I park on the road there to check my ride height after I adjust coilovers.

Wow...the minor changes you did to your car really makes a huge difference. Good job!

The new rims make the car look more aggressive.

Thats a non F Sport bumper.

But you are right, there is a lip on Jeff's car.

http://www.boldride.com/ride/2013/lexus-gs-350-f-sport

Thats the stock. That lip is a very nice additional.

My turd

That looks REALLY good. Damn Somalians

what wheels are those on the x5? not sure if it's the wheel or the angle of the photo, but makes it looked jacked up.

looks nice though, the wheels must be a bitch to clean.

he is da captain nao

I like your old wheels better, those are too busy imo

irish!

I like your old wheels better, those are too busy imo

Nice family car Hator.

Temp wise, it looks like it will be good for a good weekend for clay and wax.

Yes taken at the same old place lol

damn risky someone's still writing on your car?

Yes taken at the same old place lol

sexy bitch

rims look too old for the car doe.
a nice style but not on this gen imo.