|
|
ctr cams for b16a2
|
|
i am thinking to replace my stok cams with ctr cams-spring -reatainers ...i m running mostly stock with a j's racing intake.. it will be fine if i run this cams with stock ecu-compression-fuel pressure???? how much power gain i ll have??
|
|
|
|
Re: ctr cams for b16a2
|
|
I dont know about much hp gain didnt test it but you will notice harder n louder crossover in vtec
|
|
|
|
Re: ctr cams for b16a2
|
|
you will run lean on the stock map at switchover, you will spike to 15:1
I have b16a2 with the Si intake dual springs on the the exhaust side and the ITR intake duals on intake side with 01 CTR Cams.
Image below is an AFR plot full throttle 3rd gear pull on a stock P30 map (JDM B16A) OBDI P28 ecu
|
|
|
|
Re: ctr cams for b16a2
|
|
i had severe detonation when i tried it, do not reccomend.
|
